Linear Motors

KLM-G-40-0F2

KOMP-ACT linear motors is the newborn of the actuators’ family. It is the most powerful, efficient and compact design for mainstream application requiring average precision, medium to high speed and good to high cycling rate. It works at 24 or 48 Volts, it is the most efficient actuators of its category, dissipating only few tens of Watts. It offers a compact and built-in design, (do not require heat sink or fan), to work at stroke up to 240 mm. 

 

It includes guide rods to provide more stiffness and suppress the rotation of the shaft.

TECHNICAL DATA Green Green PLUS
Continuous force, Fc [N]*
15
20
Peak Force, Fp [N]
27
35
Continuous current, Ic [A]
2
2
Peak current, Ip [A]
6
6
Force Constant [N/A]
5.4
6.8
Phase resistance, Rp [Ohm]
2.7
3.3
Stroke length
40, 80, 120, 160, 200, 240
Repeatability [mm]
± 0.150
± 0.150
Accuracy [mm]
± 1
± 0.5
Max Acceleration, Acc max [m/s2]
72
90
Max. Average Speed, V max [m/s]
2.1
2.1
Power supply, DC [V]
24 or 48
24 or 48
Operating temperature, Top [°C]
-20…+45
-20…+45
Thermal Constant [K/W]
4.85
3.28
Slider mass, Ms [g]
443 + 1 gram X stroke [mm]
443 + 1 gram X stroke [mm]
Stator body mass, Mt [g]
825
825
Shaft Bushing Material
Sintered bronze
Housing Material
Hard-anodized aluminium (aerospace grade)
Shaft Material
Hard chrome plated stainless steel (AISI 316L)
Sensor Technology
Hall Sensor Linear Encoder

Notes: 

*The maximum force the actuator can apply and stay below a temperature of 60 °C.

KLM actuators shall be used with KOMP-ACT’s electronic controller KDRV-1-MK

PRODUCTS

AS SEEN ON

Copyright © KOMP-ACT SA | 2022